Electrical Home Improvement Conduit

• Always make sure the power to the electrical circuit being worked on is OFF.


• Just click the circuit breaker off and test a nearby outlet or light to make sure it is dead.

Tools Required When Using Conduit

Electrical Home Improvement Conduit Information

• Doing an electrical conduit project is no doubt a more complex way to wire. It does, however, offer advantages like it is much harder for a wire to get cut. It is an exact science , though. In fact, it is full of exactness. You must learn to measure accurately, cut precisely and make allowances for elbows and fittings.
  
  When you use conduit, you simply are installing a series of 1/2" or 3/4" steel pipes and then pulling or pushing 14 or 12 gauge wire through the pipe from outlet or switch box and onward to the next.


• No matter if you are adding an outlet or installing a new light you'll need to establish an accesible route to install the conduit. See Electrical Wiring for more information on wiring outlets.


• Check out these images for help on working with your electrical conduit project.


• 
  Use these pre-formed pieces of conduit for quicker installation



• 
  Conduit box has no clamps inside You must use conduit box fittings to anchor the end of the conduit



• 
  Conduit comes in 10 foot lengths. Use one of these fittings to hook two pieces of conduit together



• 
  Conduit box connector



• 
  Assorted conduit fittings to work with



• 
  
  
  Allow approximately 6" for a 90 degree bend



• It's now time to push or pull (with a wire puller tool) any wires that are required to make your home improvement conduit work for you. For sure you will need to use at least 2 wires. Make one black and one white.